• Dariusmiles2123@sh.itjust.works
    link
    fedilink
    arrow-up
    2
    ·
    3 days ago

    Interesting to know, thanks.

    I don’t remember if you can replace the battery though. That would also be big bet getting on of these used M Macs if that’s not the case…

    • Loucypher@lemmy.mlOP
      link
      fedilink
      arrow-up
      2
      ·
      3 days ago

      The battery is definitely replaceable but in latest models used to be glued on… I haven’t checked on the Apple silicon models… worse case the Apple Store can do it for you for 70/80€$ You can also remove the glue yourself, there must be an iFixit tutorial on YouTube for it

      • Dariusmiles2123@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        ·
        2 days ago

        Well then I guess Apple Silicon Macs might be on my list when I’ll need something to replace my Surface Go 1 if one day it dies or if Fedora becomes more resource hungry in the future.

    • schizo@forum.uncomfortable.business
      link
      fedilink
      English
      arrow-up
      1
      ·
      2 days ago

      As a FunFact™, you’re more likely to have the SSD controller die than the flash wear out at this point.

      Even really cheap SSDs will do hundreds and hundreds of TB written these days, and on a normal consumer workload we’re talking years and years and years and years of expected lifespan.

      Even the cheap SSDs in my home server have been fine: they’re pushing 5 years on this specific build, and about 200 TBW on the drives and they’re still claiming 90% life left.

      At that rate, I’ll be dead well before those drives fail, lol.

      • Dariusmiles2123@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        ·
        2 days ago

        How can you know how much life an SSD still has? Is it a command in the terminal on Linux? Haven’t found anything in the system information.

        • schizo@forum.uncomfortable.business
          link
          fedilink
          English
          arrow-up
          1
          ·
          2 days ago

          sudo smartctl -a /dev/yourssd

          You’re looking for the Media_Wearout_Indicator which is a percentage starting at 100% and going to 0%, with 0% being no more spare sectors available and thus “failed”. A very important note here, though, is that a 0% drive isn’t going to always result in data loss.

          Unless you have the shittiest SSD I’ve ever heard of or seen, it’ll almost certainly just go read-only and all your data will be there, you just won’t be able to write more data to the drive.

          Also you’ll probably be interested in the Total_LBAs_Written variable, which is (usually) going to be converted to gigabytes and will tell you how much data has been written to the drive.